Welcome to
Temecula Valley European
Auto Electrical
Temecula Valley European provides the best electrical auto service in Murrieta, hands down.
Heating & Air Conditioner Repair
For the best cooling and heating auto repair service in Murrieta, trust Temecula Valley European.
Engine Auto Service
When that check engine light comes on, it’s hard not to feel annoyed or even worried.
Maintenance & Auto Service
It’s a fact: regular, quality maintenance extends the life of your vehicle. It also gives you the peace of mind you need.
Top-Notch Auto Services
At Temecula Valley European, we go beyond fixing cars – we elevate your driving experience. Our auto repair services are designed to keep you on the road with confidence. From minor to complex repairs, trust us to handle your vehicle with care.
Why Choose Temecula Valley European
When it comes to car repair, there are plenty of options available. But, not all auto repair shops are created equal. At Temecula Valley European our friendly and knowledgeable team has years of experience in the auto repair industry, from minor repairs to major overhauls- we’ve seen it all!
Free WiFi
Refreshments
Waiting Area
Key Drop Off
The Absolute Best Car Service in Murrieta, CA
Temecula Valley European
What sets Temecula Valley European apart from all of the others in Murrieta, CA?
Quality Service
We use the latest diagnostic equipment and high-quality parts to ensure your vehicle is repaired to the highest standards.
Experienced and Certified Technicians
Our technicians are highly skilled and certified professionals with years of experience in the auto repair industry. They have the expertise to diagnose and repair any problem your vehicle may have.
Customer Satisfaction
Our goal is to exceed your expectations and ensure your complete satisfaction with every visit.
Auto Repair Estimates in Murrieta
Complete & Reliable Automotive Service & Repair
Recently Serviced Vehicles
-
2013 Mercedes-Benz C250
Mileage110,119Service Date10/16/2025Services Performed- Check the condition of the following components: brakes, drive belts, battery cables, starter operation, intake system, vacuum hoses, air filter, fuel system, ignition system, cooling system, hoses and fan Check level and condition of the following fluids: coolant, engine oil, transmission, power steering, brake and waster Drain engine oil. Remove engine oil filter. Install new engine oil drain plug gasket if applicable and torque engine oil drain plug to factory specification. Install new engine oil filter and torque to factory specification.
- Adjust tire pressure to factory specification
- Reset service reminder if needed.
Chelsea P. gave our service a 5 star review on 10/17/2025 -
2021 Mercedes-Benz GLB250
Mileage62,982Service Date10/14/2025Services Performed- Found the starter battery to have codes and test bad
- BATTERY – Remove & Replace – 12 Volt – [Includes: Test.]
- This dealer is required by law to charge a nonrefundable $1.00 California battery fee and a refundable deposit for each lead-acid battery purchased. A credit of the same amount as the refundable deposit will be issued if a used lead-acid battery is return
Jennifer A. gave our service a 5 star review on 10/14/2025 -
2010 Honda Accord Crosstour
Mileage42,006Service Date10/13/2025Services Performed- Found the brake fluid to be dirty but not in need of replacement
- – Check Fluid Levels – Check Tire Wear Condition – Check Multi Rib Belt – Check Engine Coolant Hoses – Check Horn, Headlight and External Lighting Systems – Check Windshield Wipers – Check the Suspension – Check the Battery
- TIMING BELT – Remove & Replace
Tessa S. gave our service a 5 star review on 10/13/2025 -
2018 Land Rover Range Rover Sport
Mileage73,686Service Date9/22/2025Services Performed- Found the battery is bad.
- Check the condition of the following components: brakes, drive belts, battery cables, starter operation, intake system, vacuum hoses, air filter, fuel system, ignition system, cooling system, hoses and fan Check level and condition of the following fluids: coolant, engine oil, transmission, power steering, brake and waster Drain engine oil. Remove engine oil filter. Install new engine oil drain plug gasket if applicable and torque engine oil drain plug to factory specification. Install new engine oil filter and torque to factory specification.
- Adjust tire pressure to factory specification
- Reset service reminder if needed.
- BATTERY – Remove & Replace – V6,Gas – [Includes: Test.]
Roberto S. gave our service a 5 star review on 9/22/2025 -
2020 Subaru Impreza
Mileage57,889Service Date9/4/2025Services Performed- Customer states check engine light is on and TV Euro previously diagnosed the oxygen sensor as bad.
- OXYGEN SENSOR – Remove & Replace – Rear
Karmen P. gave our service a 5 star review on 9/11/2025 -
2010 Mazda CX-9
Mileage224,806Service Date9/10/2025Services Performed- STARTER ASSEMBLY – Remove & Replace
Bruce K. gave our service a 5 star review on 9/10/2025 -
2016 Volvo XC90
Mileage135,171Service Date9/3/2025Services Performed- Found the vehicle to be leaking engine oil from the oil filter housing cap. Found cap to be cracked due to overtightening.
- Remove and replace oil filter cap, clean underside of vehicle.
Daryll I. gave our service a 5 star review on 9/3/2025 -
2015 Audi Q5
Mileage84,088Service Date8/20/2025Services Performed- Check the condition of the following components: brakes, drive belts, battery cables, starter operation, intake system, vacuum hoses, air filter, fuel system, ignition system, cooling system, hoses and fan Check level and condition of the following fluids: coolant, engine oil, transmission, power steering, brake and waster Drain engine oil. Remove engine oil filter. Install new engine oil drain plug gasket if applicable and torque engine oil drain plug to factory specification. Install new engine oil filter and torque to factory specification.
- Adjust tire pressure to factory specification
- Reset service reminder if needed.
Neil L. gave our service a 5 star review on 8/20/2025 -
2013 Hyundai Sonata
Mileage197,350Service Date8/11/2025Services Performed- Verified engine cranked normally and had good compression (~180 psi). Checked live data — no RPM signal during crank. Confirmed low-pressure fuel pump only primed for ~3 seconds then shut off. Reviewed wiring diagram and found crank sensor power supplied through Sensor 2 fuse. Tested Sensor 2 fuse in under-hood fuse box — fuse blown. Installed new fuse, rechecked live data — RPM signal present, fuel pump ran continuously during crank, engine started and ran normally. Advise customer that this vehicle has been under maintained and does have sludge build up, as well as no oil on the dipstick.
- Check the condition of the following components: brakes, drive belts, battery cables, starter operation, intake system, vacuum hoses, air filter, fuel system, ignition system, cooling system, hoses and fan Check level and condition of the following fluids: coolant, engine oil, transmission, power steering, brake and waster Drain engine oil. Remove engine oil filter. Install new engine oil drain plug gasket if applicable and torque engine oil drain plug to factory specification. Install new engine oil filter and torque to factory specification.
- Adjust tire pressure to factory specification
- Reset service reminder if needed.
- AIR COND HOSE – Remove & Replace – Discharge Hose,Compressor to Discharge Pipe – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
- Evacuate & Recharge the A/C system. Fill A/C system to factory specifications.
Angelica J. gave our service a 5 star review on 8/12/2025 -
2009 Mercedes-Benz C300
Mileage174,128Service Date8/6/2025Services Performed- Found
- ELECTRIC FAN BLADE OR MOTOR – Remove & Replace
- Card Fee (if applicable)
Brigitte O. gave our service a 5 star review on 8/8/2025 -
2004 Kia Optima
Mileage177,875Service Date8/5/2025Services Performed- Evacuate & Recharge the A/C system. Fill A/C system to factory specifications.
- Found schrader valves to be leaking
- Check the condition of the following components: brakes, drive belts, battery cables, starter operation, intake system, vacuum hoses, air filter, fuel system, ignition system, cooling system, hoses and fan Check level and condition of the following fluids: coolant, engine oil, transmission, power steering, brake and waster Drain engine oil. Remove engine oil filter. Install new engine oil drain plug gasket if applicable and torque engine oil drain plug to factory specification. Install new engine oil filter and torque to factory specification.
- Adjust tire pressure to factory specification
- Reset service reminder if needed.
Rob P. gave our service a 5 star review on 8/5/2025 -
2014 BMW 428i
Mileage109,388Service Date8/1/2025Services Performed- TRANSMISSION OIL PAN GASKET &/OR FILTER – Remove & Replace
- Confirmed the cold-start stall comes from a torn PCV diaphragm in the valve cover, which is also leaking oil, letting un-metered air into cylinders 1-2. Crankcase vacuum read 0 in-Hg (spec –11) and fuel trims spiked +19 % when the breather was blocked, proving the leak. Valve-cover/PCV assembly is faulty and must be replaced to stop the oil leak, restore proper mixture, and eliminate the stall.
- VALVE COVER GASKET – Remove & Replace – Coupe
Nathan L. gave our service a 5 star review on 8/1/2025
Contact Us Today for an Auto Repair Estimate
Our friendly and knowledgeable staff is always happy to answer any questions you may have and will keep you informed throughout the entire repair process. So why pick us for all your Murrieta auto repair needs? The answer is simple: expertise, customer service, affordability, convenience, and quality. Contact us today to schedule your appointment and experience the difference for yourself.
Hours
Mon-Fri : 8am-4pmSat-Sun : Closed
